Search
Browse Categories
Products

Additional Exterior Accessories


Displaying products 1 - 8 of 8 results
Hard Dog Receiver Hitches for ALL Miata MX-5
Price: From $160.00 to $225.00
Hard Dog Receiver Hitches for ALL Miata MX-5
Hard Dog Miata / MX-5 receiver hitches are suitable for tire carriers, bike racks and small trailers. Their superior mounting systems provide the strongest attachment point available.
Draw Bar for Hard Dog Receiver Hitches for 1990-2017+ Miata MX-5
Price: $25.00
Draw Bar for Hard Dog Receiver Hitches for 1990-2017+ Miata MX-5
This allows you to install a hitch ball for towing small utility or race trailers with your Hard Dog Miata / MX-5 receiver hitch.
Garage Star Fender Braces for 90-05 Miata
Price: $219.00
Garage Star Fender Braces for 90-05 Miata
Garage Star fender braces help virtually eliminate the rattle and cowl shake that we see with the first and second generation Miatas.
TDR Tow Hooks for 90-05 Miata
Price: $45.00
TDR Tow Hooks for 90-05 Miata
Front and rear tow hooks for 90-05 Miata. Mazda's factory two hooks are for tying the car down to a shipping deck only. These brackets will clear the bumper to prevent damage from towing.
TDR "Shorty" Amplified Antenna for 90-05 Miata
Price: $39.00
TDR "Shorty" Amplified Antenna for 90-05 Miata
ratingratingratingratingrating
The TDR "shorty" antenna kit for quarter panel or fender mounting. Sits at 60°, removable 7" antenna mast. includes instructions and all hardware.
TDR Air Splitter Trim
Price: From $2.00 to $14.00
TDR Air Splitter Trim
Optional trim to give a finished look to the TDR splitters and provide a soft protective edge.
TDR Air Splitter Replacement Hardware Kit
Price: $15.00
TDR Air Splitter Replacement Hardware Kit
Replacement nylon hardware for the TDR air Splitters. Kit includes, 17 nylon nuts, bolts and washers and 4 clips. This is enough for any TDR air splitter. (Not for Radical Splitters)
TDR Turn-Buckles (SOLD INDIVIDUALLY)
Price: From $35.00 to $40.00
TDR Turn-Buckles (SOLD INDIVIDUALLY)
Track Dog Racing offers the same turn-buckles we use in our Radical Air Splitters. We ofter this in 8" or 9" length. They are mostly aluminum constuction for strength and lightness. One side is reverse threaded making it easy to adjust the length.

Events and News 


Track Dog Racing FAQ

Supercharger FAQ

Intercooler FAQ

Technical Articles

Supercharger Upgrade Checklist

Roll Bar FAQ

Dyno Runs

High Performance Radiators

Customer Testimonials