Search
Browse Categories
Products

Racing Beat Power Pulse Single Tip Muffler for 90-97 Miata


ratingratingratingratingrating
Price: $295.00
Item Number: RB-56451
Manufacturer: Racing Beat
Racing Beat Logo
Power Pulse
Single Tip Muffler
1990-1997 Miata

Power Pulse Muffler
1990-1997 Miata

Designed and manufactured by Racing Beat, the Power Pulse Muffler is intended for use on all 1990-1997 Miatas. The heart of the Power Pulse Exhaust System is a polished 304-stainless steel muffler canister. This polished canister is equipped with stainless steel inlet and outlet pipes for superior durability. For maximum performance the Power Pulse Muffler features the same 2.375" OD Straight-Flow internal design configuration as Racing Beat's RX-7 Turbo II exhaust systems. The 3.5" OD exhaust tip is manufactured using highly polished 304-stainless steel and is slightly oval in shape to provide a perfect balance and proportional look for the Miata's rear bumper. Each tip features a etched Racing Beat logo to add the finishing touch!
Racing Beat Muffler NA Display
Racing Beat Muffler NA Installed

Designed entirely by Racing Beat, this muffler features a internal combination of stainless steel wool and ceramic sound-deadening packing insulation to provide the optimum exhaust note for your Miata. The Power Pulse Muffler offers a deep, throaty exhaust note, without any harsh, buzzy or "droning" tones. All Racing Beat's exhaust are tuned in-house by their engineering team to produce a modest exhaust tone at low speeds, and a bit more "attitude" under full throttle acceleration. 

Easy-to-install, this muffler can be bolted to the Racing Beat Connecting Pipe in minutes using the supplied hardware kit. The muffler is "cat-back" emissions legal and meets all California sound level requirements.

Performance

As reviewed in the November 1999 issue of Import Tuner, this Power Pulse exhaust system (muffler and connecting pipe) added 3.2 horsepower to the wheels of a 1990 Miata. Combine this exhaust with a High Flow Air Intake for gains of up to 9 hp! Note: This muffler must be used with a Connecting Pipe (select the year for your application) for correct fitment. This muffler can only be mated to a Racing Beat connecting pipe section.
Racing Beat Muffler NA
Connecting Pipe (Required)

Each Power Pulse Muffler requires the use of a Racing Beat connecting pipe section. We offer two (2) versions of this pipe: the Power Pulse Connecting Pipe, or the Sport Connecting Pipe.

The Power Pulse Connecting Pipe incorporates a presilencer to moderate the sound level to deep, throaty tone. Both the muffler canister and the presilencer are manufactured using a stainless steel perforated tube core, wrapped with stainless steel wool, and packed to capacity with a high temperature ceramic wool. This design technique allows for a low restriction, straight through design, combined with superior sound dampening characteristics.

Racing Beat Muffler NA
The Power Pulse Sport Connecting Pipe is produced without the presilencer section, and offers a louder, and more robust exhaust note. While not obnoxious or buzzy, this pipe will allow the exhaust note to rise more moderately under acceleration.

Assembled in the USA by Racing Beat, Inc. Assembled in the USA by Racing Beat, Inc.

Related Products

Jackson Racing Header for 90-97 Miata
Price: $489.00
Jackson Racing Header for 90-97 Miata
The Jackson Racing header pulls hard through a wide powerband without that head-throbbing resonance often found in low-quality headers.
Magnaflow Catalytic Converter for 90-97 Miata
Price: $139.00
Magnaflow Catalytic Converter for 90-97 Miata
We have found a high quality replacement catalyst for your Miata, at a fraction of the dealer price! Fits 90-97.
Racing Beat Power Pulse Connecting Pipe for 90-97 Miata
Price: $148.00
Racing Beat Power Pulse Connecting Pipe for 90-97 Miata
ratingratingratingratingrating
A Power Pulse Miata Connecting Pipe is required with the Racing Beat single or dual outlet Power Pulse muffler assemblies on all 1990-1997 Miatas for proper fitment.
MOSS Stainless Steel Header for 99-05 Miata
Price: $375.00
MOSS Stainless Steel Header for 99-05 Miata
The MOSS header is designed to fit under the Jackson Racing M45 and MOSS MP62 Superchargers. The highly polished 304 stainless steel looks beautiful and is strong.
Racing Beat Header for 90-93 Miata
Price: $446.00
Racing Beat Header for 90-93 Miata
ratingratingratingratingrating
Manufactured entirely from 304-stainless steel for superior durability, this 4:1 header for the 90-93 Miata will offer many years of performance driving and provide noticeable power gains with improved mid-range and top end performance gains.
Racing Beat Header for 94-97 Miata
Price: $446.00
Racing Beat Header for 94-97 Miata
Manufactured entirely from 304-stainless steel for superior durability, this 4:1 header for the 94-97 Miata will offer many years of performance driving and provide noticeable power gains with improved mid-range and top end performance gains.

Product Reviews

(1 Rating, 0 Reviews) Average Rating:
ratingratingratingratingrating

Events and News 


Track Dog Racing FAQ

Supercharger FAQ

Intercooler FAQ

Technical Articles

Supercharger Upgrade Checklist

Roll Bar FAQ

Dyno Runs

High Performance Radiators

Customer Testimonials