Search
Browse Categories
Products

AEM Universal Wideband Failsafe Gauge


Price: $349.00
Item Number: AEM-30-4900
Manufacturer: Innovate

 

Innovate Motorsports Logo Universal Wideband Failsafe
AFR/Boost Gauge

AEM's Wideband Failsafe Gauge provides the ability to accurately tune AFR, while actively protecting your engine by constantly monitoring AFR curves and activating a user-defined failsafe strategy if it runs lean.

The Wideband Failsafe Gauge is a Universal Exhaust Gas Oxygen (UEGO—“you-way-go”) controller with an internal boost sensor, an internal data logger and a full color Organic Light Emitting Diode (OLED) display. It includes technology to activate a failsafe strategy in the event AFR falls outside of a user-defined operating window. If the AFR falls outside of the set operating window, the Wideband FAILSAFE Gauge triggers a user defined output function that can save an engine from catastrophic damage.

This gauge is a must have for all tuned performance engines, either forced induction or naturally aspirated, fuel injected or carbureted. Any high performance vehicle owners who want a highly accurate AFR tuning tool with logging and a protection strategy that can save an engine from catastrophic failure will want this Failsafe device.

Since the Wideband Failsafe Gauge is a wideband AFR controller with an internal boost sensor (up to 29 PSIg), it is able to display AFR and either boost or vacuum in real time on a vibrant Organic LED screen. It also includes an on board data logger that records AFR, RPM and boost/vacuum and can be downloaded and viewed in AEMdata analysis software. The gauge includes a low side output for triggering a failsafe strategy in the event AFR falls outside of the operating window, and an RPM input to log RPM for tuning purposes.

The gauge’s failsafe strategy is completely user definable, from something as simple as making the gauge flash to using the ground output to trigger a check engine light, to cut boost, retard timing, or even switch to a safety map using a standalone engine management system.

The Wideband Failsafe Gauge’s software simplifies the interface set up. Choose displayed parameters (AFR, boost or vacuum) on the center OLED screen and bar graph, set the alarm flash mode and adjust the gauge’s lighting for a custom look, then install the correct faceplate to match your configuration (6 faceplates to choose from).




AEM 30-4900


  • Bosch Wideband UEGO sensor and weld-in bung included
  • On-Board 3+ hour Datalogging capability at 20hz per parameter
  • Intuitive set up software (PC based with USB connectivity)
  • Interchangeable faceplates and bezels
  • No free air calibration required—ever
  • Data analysis using AEMdata software
  • AEMnet compatible
  • Standard 52mm gauge size

WIDEBAND FAILSAFE GAUGE TECHNICAL FEATURES:

  • Displays both boost or vacuum and AFR or Lambda simultaneously on the same gauge
  • Internal boost sensor
  • Bosch Wideband UEGO sensor and weld-in bung included
  • On-Board 3+ hour Datalogging capability at 20hz per parameter
  • Full color Organic Light Emitting Diode (OLED) Display in center, user selectable feature (boost/vacuum or AFR)
  • 24 three-color sweeping LEDs, user selectable feature (boost/vacuum or AFR)
  • Intuitive set up software
  • Dimmer input included
  • Interchangeable faceplates and bezels (see options, below)
  • No free air calibration required—ever
  • Data analysis using AEMdata software

WIDEBAND FAILSAFE GAUGE INSTALLATION FEATURES:

  • AEMnet compatible (CAN 2.0)
  • Differential AFR analog output
  • Differential boost analog output
  • Configurable RPM input for logging
  • One low-side driver output (Ground with 1.5 amp max draw)
  • Positive-lock connectors
  • Tunable PC-based software with USB connectivity
  • Time based reset for outputs

WIDEBAND FAILSAFE GAUGE FACEPLATE STYLES:

  • Kit comes with 6 different faceplates and black and silver bezels.
  • Black Vacuum only in sweeping LEDs
  • Black and White AFR in sweeping LEDs
  • Black and White Vacuum/Boost in sweeping LEDs
  • Black Lambda in sweeping LEDs



Related Products

DDM Works Gauge Panel for 90-97 Miata
Price: $89.00
DDM Works Gauge Panel for 90-97 Miata
This radio surround fits in the non-standard radio hole in the 1990-1995 Miata's. Made of 304 stainless steel it is as strong as it is beautiful.
TDR Single A-Pillar Gauge Pod (90-05)
Price: $38.00
TDR Single A-Pillar Gauge Pod (90-05)
These single gauge gauge pods hold one 52mm gauge in style. They are installed over your current factory a-pillar and are held into place by a few plastic pins inserted into holes you drill in the stock a-pillar.
TDR Dual A-Pillar Gauge Pod for 90-05 Miata
Price: $49.00
TDR Dual A-Pillar Gauge Pod for 90-05 Miata
These gauge pods hold two 52mm gauges in style. They are installed over your current factory a-pillar and are held into place by a few plastic pins inserted into holes you drill in the stock a-pillar.
TDR Custom 3-Gauge Angled Panel for 99-05 Miata
Price: $45.00
TDR Custom 3-Gauge Angled Panel for 99-05 Miata
These gauge panels hold three 52mm gauge and each gauge is angled independently towards the driver. They mount into the factory DIN slot and are held into place securely.
TDR Wiring Harness
Price: From $5.00 to $9.00
TDR Wiring Harness
Simplify the wiring of your gauges, sensors and other electrical components with connectors for quick release. Available in 2, 6 and 9 pin styles.
TDR Stainless Steel Wideband O2 Sensor Extension
Price: $23.00
TDR Stainless Steel Wideband O2 Sensor Extension
Stainless Steel O2 Extension for improved life of expensive wide-band O2 sensors. This stainless steel extension allows the sensor tip to be out of the main exhaust stream preventing it from over-heating.
TDR Radio Removal Tool for 96-05 Miata
Price: $15.00
TDR Radio Removal Tool for 96-05 Miata
Removing a factory radio can be a difficult task, but We have made it simple with this radio removal tool. This tool works with the Mazda DIN style factory radios from 1996-2005.
Innovate DB-Gauge with LC-2 Kit
Price: $229.00
Innovate DB-Gauge with LC-2 Kit
This kit comes complete with the patented award-winning LC-2 Wideband Controller, DB-Gauge, Bosch 5-wire Wideband 02 Sensor, Bung/Plug Kit, Software CD, and quick start guide.

Product Reviews

(0 Ratings, 0 Reviews)

Events and News 


Track Dog Racing FAQ

Supercharger FAQ

Intercooler FAQ

Technical Articles

Supercharger Upgrade Checklist

Roll Bar FAQ

Dyno Runs

High Performance Radiators

Customer Testimonials