Search
Browse Categories
Products

TDR Air Filter Kit for the 99-05 Miata with the M45 Supercharger


Price: $105.00
Item Number: TDR-AFK-JR99
Manufacturer: Track Dog Racing
TDR Logo
TDR High Flow Air Filter Kit
1999-2005 Miata with M45 Supercharger

Airflow restriction is minimized using a large 2 3/4" silicone hose to smooth the airflow and place the air filter further from heat. The durable 5-layer silicone hose is an excellent insulator and will help keep the intake air cool. The K&N air filter attaches to the outside of the silicone hose to add even more volume and smoothes out the airflow. Consider the TDR M45 Bypass Hose Kit 1 for additional air filter performance. TDR 99-05 M45 Intake Kit
K&N Logo

Related Products

TDR Supercharger Nose Pulleys for 90-05 Miata with M45 or MP62 Supercharger
Price: $102.00
TDR Supercharger Nose Pulleys for 90-05 Miata with M45 or MP62 Supercharger
These pulleys are CNC machined aluminum and anodized black. These are replacements/upgrades for either the M45 and MP62 depending on which belt system your blower uses.
TDR M45 Bypass Hose Kit 1
Price: $15.00
TDR M45 Bypass Hose Kit 1
This kit reroutes the idle air bypass hose, cleans up the engine bay area and improves the air filter area for the TDR Air Filter Kits.
TDR M45 Bypass Hose Kit 2
Price: $15.00
TDR M45 Bypass Hose Kit 2
This kit is for the dummy throttle body side M45 Supercharger. Required with the JR Bypass Kit 1 when ordered for stand-alone (non-intercooler) M45 Supercharged setups.
Supercharger Bypass Vacuum Actuator
Price: $125.00
Supercharger Bypass Vacuum Actuator
Direct replacement for the stock supercharger bypass actuator unit. We have found that these units will fail after 1-2 years of use or around 30K miles.
Supercharger Bypass Check Valve for 90-05 Miata with M45 Supercharger
Price: $35.00
Supercharger Bypass Check Valve for 90-05 Miata with M45 Supercharger
Some Jackson Racing M45 Supercharger kits came with an idle air check valve that mounted in the 3/4" bypass hose, good for about 0.5 PSI of boost.
Supercharger Oil Replacement Kit for M45 and MP62 Superchargers
Price: $40.00
Supercharger Oil Replacement Kit for M45 and MP62 Superchargers
We recommend that you replace the oil in your M45 or MP62 supercharger every 30,000 miles -- or once a year if you are pushing the supercharger beyond stock recommendations (higher boost or extended track usage).
TDR Belt Tensioner for 90-05 Miata with the M45 or MP62 Superchargers
Price: $205.00
TDR Belt Tensioner for 90-05 Miata with the M45 or MP62 Superchargers
ratingratingratingratingrating
Superior hardware and design make the TDR tensioner a significant upgrade if you have the original belt tensioner from the JRSC or Moss kit.

Product Reviews

(1 Rating, 1 Review) Average Rating:
ratingratingratingratingrating
ratingratingratingratingrating
Not bad, needs instructions (contained in my review).
Keith McDonnell (Rosedale, IN) 8/7/2013 3:31 PM
The parts themselves are excellent quality, and real simple, a multi-ply tube with a nice bend in it, a K&N air filter, and two hose clamps. No instructions were included, but if you install parts yourself on a regular basis you can figure it out. First you of course remove the Jackson Racing air filter box and remove your intake air temperature sender from the Jackson Racing air filter box. Then you have to remove a bracket that has three relays attached to it. I was able to bolt two of the relays into the mounting holes that originally held the bracket, but the third relay is swinging free. Also, with the new intake tube there is no provision for the intake air temperature sender. I used an appropriate sized drill bit and drilled my own hole in the top of the multi-ply tube just in front of the bend. I never use a screw driver to tighten hose clamps, and all of the hose clamps in my engine bay use an 8mm socket... except the one that comes on the K&N filter. I believe it is 6mm. So, in conclusion this is a high quality intake system, and would be excellent with two minor revisions: 1. A hole for the intake air temperature probe. 2. Supply hose clamps that use the same size socket for tightening.

Events and News 


Track Dog Racing FAQ

Supercharger FAQ

Intercooler FAQ

Technical Articles

Supercharger Upgrade Checklist

Roll Bar FAQ

Dyno Runs

High Performance Radiators

Customer Testimonials