Search
Browse Categories
Products

Centric Front Wheel Hub Assembly for 90-05 Miata


Price: $115.00
Item Number: CEN-FHUB
Manufacturer: Timken
Timken Logo Front Wheel Hub Assembly
1990-2005 Miata

Has your Miata developed a thunk-thunk-thunk type sound on one of the front wheels while driving?  The sound often gets louder or disappears completely when making turns.  Can you wiggle the wheel in and out when the car is up off the ground on jack stands?  This is indicative of a front hub going out. Losing a wheel is not a fun experience.  Replace the wheel hub before it can cause complete loss of control. 

Ball Bearing
Centric's wheel end system is a self-retained, integrated package bearing featuring active sensing technology that offers design flexibility and bolt-on simplicity. This hub assembly improves stiffness and brake performance, reduces weight and envelope size, lowers assembly costs and reduces warranty claims.

Features

  • Integrated raceway and hub increases stiffness as much as 30 % over conventional systems. Also eliminates the discrete race variables between the bearing and hub, providing a closer preload setting range.
  • Narrow overall package width and reduced radial section thickness lowers unsprung weight, improving vehicle maneuverability and fuel efficiency.
  • Features a pre-sealed, pre-greased and pre-set bearing package design with integrated sensing technology for anti-lock braking systems, total traction control and vehicle dynamics systems.
  • Hub-forming technology reduces strain on components and the costs associated with purchased parts and labor. Also allows for communization between driven and non-driven designs.




Timken Front Wheel Bearing Assembly
Price is for one hub assembly.  Fits both ABS and Non-ABS

NOTE: Non-ABS cars:  All our wheel hub assemblies have an ABS Ring Gear.  We found these hubs to be about $20 less expensive than the Non-ABS hubs.  The ABS hubs are a direct fit to cars without ABS.    

Related Products

Genuine Mazda Tie Rod Ends for 90-05 Miata
Price: From $87.00 to $97.00
Genuine Mazda Tie Rod Ends for 90-05 Miata
Tie rod ends are vital to your steering system, so you need to maintain them with the utmost care. Your Miata's tie rod ends are a critical connection to the steering rack and your wheels.
Steering Rack Bellow for 90-99 Miata
Price: $24.00
Steering Rack Bellow for 90-99 Miata
Steering rack boots are designed to create a seal between the rack and pinion and the tie rod end. They not only seal in the lubricant but also keep moisture and dirt out of vital steering components ensuring their reliable and long-lasting service life.
Genuine Mazda Front Upper Ball Joint Boot for 90-05 Miata
Price: $13.00
Genuine Mazda Front Upper Ball Joint Boot for 90-05 Miata
If your upper ball joint boots are torn, replace the boots before the ball joints wear out. These ball joints are pressed in and not easily swapped. Replacing the boots is much easier.
Genuine Mazda Front Hub Dust Cap for 90-05 Miata
Price: $7.00
Genuine Mazda Front Hub Dust Cap for 90-05 Miata
Genuine Mazda Front Hub Dust Caps. Fits 1990-2005 Miata. Replace the dust caps when replacing the front hub. These dust covers keep dirt and grime out of the front bearing area and prevents premature wear of parts. Priced individually.
Front Lower Ball Joints for 90-05 Miata
Price: $55.00
Front Lower Ball Joints for 90-05 Miata
Front If your lower ball joint boots are torn, the grease lubricating them will dry out and dirt will get in. This will wear down the ball joint and can result in catastrophic steering failure. If your ball joint boots are torn, consider replacing them.
Spindle Nut for 90-15 Miata MX-5
Price: $8.00
Spindle Nut for 90-15 Miata MX-5
A new spindle nut is recommended every time you replace a wheel bearing. This holds your whole wheel on and this is not the place to skimp. Replaced it everytime you remove it.
Red Line Power Steering Fluid
Price: $18.00
Red Line Power Steering Fluid
Full Synthetic Power Steering Fluid provides much improved wear protection, resists thermal breakdown, evaporation and foaming at high temperatures. Also, provides continued high pump output. Suitable for Miata steering units.

Product Reviews

(0 Ratings, 0 Reviews)

Events and News 


Track Dog Racing FAQ

Supercharger FAQ

Intercooler FAQ

Technical Articles

Supercharger Upgrade Checklist

Roll Bar FAQ

Dyno Runs

High Performance Radiators

Customer Testimonials