TDR Seat Rails for 90-15 MX5 Miata

The rail is available in three different configurations.  

• Driver side 

• Passenger side

• Drivers side "LOW" * (90-05 Miata only)

• Passenger side "LOW" * (90-05 Miata only) - COMING SOON!

NOTE: The TDR Rally Sport seat on our TDR Seat Rail is about 2 in. lower than stock. 

* The Driver's side "LOW" provides an additional ¾ in. of head room but it requires removal of the rear seat mounts and prevents swapping back to the stock seat.  We also include large fender washers to complete installation.

Other features include:

• All hardware included to install the rail with a bottom mount race seat.

• Lowest possible mount outside of bolting seat directly to the floor

• Easy removal and installation makes it easy to service or bolt in on track days. 

• Durable black wrinkle powder coated finish.

• One piece design with no welds.

• Pre-drilled and tapped holes for flat bottom mount seats.

• Direct bolt in for all 90-15 Miata

*May not fit all applications. Designed for flat bottom mount seats. Side mount seats will require modification.

Tested and used on our personal cars with our TDR Ultra Shield Rally Sport seats with 10° layback.  May work with other flat, bottom or could be modified for side mount seats.

FREE SHIPPING when purchased with TDR Rally Sport race seat.  (Add as option when adding seat to cart)

Why fixed mount?  Any seat rail slider will add height.  If you are adding race seats like the Ultra Shield TDR Rally Sport your goal typically is to get as low as possible below a roll bar or roll cage and to lower the center of gravity.  In our experience, if you set the fixed rail to your ideal position you will not miss a seat slider.  

WARNING: This article is sold without warranty, expressed or implied. No warranty is made to this product's ability to protect the user from any injury or death. The user assumes that risk.

Click here for detailed installation instructions.