Full Synthetic Power Steering Fluid provides much improved wear protection, resists thermal breakdown, evaporation and foaming at high temperatures. Also, provides continued high pump output. Suitable for Miata steering units.
|
Price: MFG backordered - 2 Months
Centric's wheel end system is a self-retained, integrated package bearing featuring active sensing technology that offers design flexibility and bolt-on simplicity. This hub assembly improves stiffness and brake performance.
|
Hub Unit Bearing Assemblies: Preset, Pre-Greased And Pre-Sealed Get a smoother ride with Timken hub assemblies. Low runout reduces noise and vibration, improving braking performance. premium bearings with precision profiles, uniform internal geometry and
|
Front If your lower ball joint boots are torn, the grease lubricating them will dry out and dirt will get in. This will wear down the ball joint and can result in catastrophic steering failure. If your ball joint boots are torn, consider replacing them.
|
Price: From $93.00 to $99.00
Tie rod ends are vital to your steering system, so you need to maintain them with the utmost care. Your Miata's tie rod ends are a critical connection to the steering rack and your wheels.
|
Price: From $45.00 to $60.00
Timken wheel bearings are designed to be exact replacements for your OEM wheel bearings. Their steel roller bearing configuration allows for maximum performance without sacrificing durability.
|
Steering rack boots are designed to create a seal between the rack and pinion and the tie rod end. They not only seal in the lubricant but also keep moisture and dirt out of vital steering components ensuring their reliable and long-lasting service life.
|
If your upper ball joint boots are torn, replace the boots before the ball joints wear out. These ball joints are pressed in and not easily swapped. Replacing the boots is much easier.
|
Genuine Mazda Front Hub Dust Caps. Fits 1990-2005 Miata.
Replace the dust caps when replacing the front hub.
These dust covers keep dirt and grime out of the front bearing area and prevents premature wear of parts.
Priced individually.
|
A new spindle nut is recommended every time you replace a wheel bearing. This holds your whole wheel on and this is not the place to skimp. Replaced it everytime you remove it.
|
Wheel Studs, Press-In, 12mm x 1.5 Right Hand Thread, Mazda, Set of 4
|
Wheel Studs, Press-In, 12mm x 1.5 Right Hand Thread, Mazda, Set of 4
|
This seal goes between the rear axle and the rear upright. We recommend replacing these anytime you replace a rear wheel bearing.
| | | |