Exedy Clutch Slave Cylinder for 90-15 Miata

Miata Clutch Slave Cylinder's are notorious for going out without warning.  The problem is when they fail, they leak inside their dust boot leaving no tell tale spots on the driveway.  Next time you are under your car, pop the boot off the slave cylinder.  If it's wet inside the boot, your slave is leaking and can fail at any time.  Time to replace it before it strands you on the side of the road.

• Fits all 1990-2005 Miatas

• One of the few common failure points on a Miata

• Exedy/Daikin GlobalParts Clutch Slave Cylinders are brand new OEM Quality Clutch Slave Cylinders built specifically for your Miata. The box will say "Equal", but it is manufactured by Daikin, the parent company of Exedy clutches

NOTE: Occasionally a repaired leaking slave will then add pressure back to the Clutch Master Cylinder causing it to fail if it too is worn out. We sell them as well. (See Below) If you are wanting peace of mind, replace both at the same time. 

Consider upgrading your clutch line as well for a firmer pedal and easier clutch bleeding.