CLEARANCE Innovate LM-2 Digital Air/Fuel (Single Channel O2) Ratio Meter & OBD-II/CAN Scan Tool

CLEARANCE:  We are no longer selling this item.  Once they're gone, they're gone!

The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. 

Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meter’s award-winning digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition

• Patented “Direct Digital” Wideband Technology

• Wideband O2 Compatible with ALL fuel types

• Single Channel Version Available

• OBD-II Scan tool- read/clear DTCs and log up to 16 channels of CAN OBD-II Data

• Log directly to SD card (included)

• Playback log data on screen and/or with powerful LogWorks software (included)

• Large high-contrast graphics LCD

• Built-in RPM converter (direct frequency or with optional inductive clamp)

• 4 fully-differential analog inputs

• 2 configurable linear analog outputs

• Positive lock connectors for all connections

• Innovate MTS serial IN and OUT

• USB connection to your PC

The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user.

The LM-2 Duo Kit (Single Wideband O2) includes the LM-2 meter, (2) Bosch wide-band oxygen sensors, (2) 8 ft sensor cables, cigarette-lighter power adapter, analog in/out cable, ODB-II/CAN interface cable, SD memory card, USB cable for PC connection, (2) weld-in bung and plug kits, LogWorks software CD, and quick-start guide. Carrying Case also included!